artisynth.core.mechmodels

Class ParticleLineConstraint

java.lang.Object

artisynth.core.modelbase.ModelComponentBase

artisynth.core.mechmodels.ConstrainerBase

artisynth.core.mechmodels.RenderableConstrainerBase

artisynth.core.mechmodels.ParticleConstraintBase

artisynth.core.mechmodels.ParticleLineConstraint

All Implemented Interfaces:

Constrainer, HasNumericState, ModelComponent, PostScannable, RenderableComponent, TransformableGeometry, ScalableUnits, java.lang.Cloneable, HasProperties, HierarchyNode, HasRenderProps, IsRenderable, IsSelectable, Renderable, Scannable

public class ParticleLineConstraint
extends ParticleConstraintBase
implements ScalableUnits, TransformableGeometry

Nested Class Summary

Nested classes/interfaces inherited from interface artisynth.core.modelbase.ModelComponent

ModelComponent.NavpanelVisibility

Field Summary

Fields

Modifier and Type	Field and Description
static PropertyList	myProps

Fields inherited from class artisynth.core.modelbase.ModelComponentBase

enforceUniqueCompositeNames, enforceUniqueNames, myNumber, NULL_OBJ, useCompactPathNames

Fields inherited from interface artisynth.core.modelbase.TransformableGeometry

TG_ARTICULATED, TG_DRAGGER, TG_PRESERVE_ORIENTATION, TG_SIMULATING

Fields inherited from interface maspack.render.IsRenderable

TRANSPARENT, TWO_DIMENSIONAL

Constructor Summary

Constructors

Constructor and Description
ParticleLineConstraint()
ParticleLineConstraint(Line line)
ParticleLineConstraint(Particle p, Line line)
ParticleLineConstraint(Particle p, Vector3d dir, Point3d center)
ParticleLineConstraint(Vector3d dir, Point3d origin)

Method Summary

Modifier and Type	Method and Description
void	addTransformableDependencies(TransformGeometryContext context, int flags) Adds to context any transformable components which should be transformed as the same time as this component.
RenderProps	createRenderProps() Factory method to create render properties appropriate to this object.
PropertyList	getAllPropertyInfo() Returns a list giving static information about all properties exported by this object.
Vector3d	getDirection()
double	getLineSize()
Point3d	getOrigin()
void	prerender(RenderList list) Called prior to rendering to allow this object to update the internal state required for rendering (such as by caching rendering coordinates).
void	render(Renderer renderer, int flags) Render this object using the functionality of the supplied Renderer.
void	scaleDistance(double s) Scales all distance coordinates.
void	scaleMass(double s) Scales all mass units.
void	setLineSize(double len)
void	transformGeometry(AffineTransform3dBase X) Applies an affine transformation to the geometry of this component.
void	transformGeometry(GeometryTransformer gtr, TransformGeometryContext context, int flags) Transforms the geometry of this component, using the geometry transformer gtr to transform its individual attributes.
void	updateBounds(Vector3d pmin, Vector3d pmax) Update the minimum and maximum points for this object.
double	updateConstraints(double t, int flags) Updates the current set of constraints, and returns the maximum penetration > 0 associated with all of them.

Methods inherited from class artisynth.core.mechmodels.ParticleConstraintBase

addBilateralConstraints, addParticle, addParticles, addUnilateralConstraints, getBilateralForces, getBilateralInfo, getBilateralSizes, getCompliance, getConstrainedComponents, getDamping, getParticle, getPenetrationTol, getSoftReferences, getState, getUnilateralForces, getUnilateralInfo, getUnilateralSizes, isEngaged, isUnilateral, numParticles, removeParticle, setBilateralForces, setCompliance, setDamping, setPenetrationTol, setState, setUnilateral, setUnilateralForces, updateReferences, zeroForces

Methods inherited from class artisynth.core.mechmodels.RenderableConstrainerBase

copy, defaultRenderPropsAreNull, getRenderHints, getRenderProps, getSelection, isSelectable, numSelectionQueriesNeeded, setRenderProps

Methods inherited from class artisynth.core.mechmodels.ConstrainerBase

addFrictionConstraints, getFrictionForces, getFrictionState, getUnilateralState, hasState, maxFrictionConstraintSets, setFrictionForces, setFrictionState, setUnilateralState

Methods inherited from class artisynth.core.modelbase.ModelComponentBase

checkFlag, checkName, checkNameUniqueness, clearFlag, clone, connectToHierarchy, createTempFlag, disconnectFromHierarchy, getChildren, getGrandParent, getHardReferences, getName, getNameRange, getNavpanelVisibility, getNavpanelVisibility, getNumber, getParent, getProperty, hasChildren, isFixed, isMarked, isScanning, isSelected, isWritable, makeValidName, makeValidName, notifyParentOfChange, postscan, printReferences, recursivelyContained, recursivelyContains, removeTempFlag, scan, setFixed, setFlag, setMarked, setName, setNavpanelVisibility, setNavpanelVisibility, setNumber, setParent, setScanning, setSelected, setWritable, write

Methods inherited from class java.lang.Object

equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Methods inherited from interface artisynth.core.modelbase.TransformableGeometry

transformPriority

Methods inherited from interface artisynth.core.modelbase.ModelComponent

connectToHierarchy, disconnectFromHierarchy, getHardReferences, getName, getNavpanelVisibility, getNumber, getParent, hasState, isFixed, isMarked, isSelected, notifyParentOfChange, scan, setFixed, setMarked, setName, setNumber, setParent, setSelected, setWritable

Methods inherited from interface maspack.properties.HasProperties

getProperty

Methods inherited from interface maspack.properties.HierarchyNode

getChildren, hasChildren

Methods inherited from interface artisynth.core.modelbase.PostScannable

postscan

Methods inherited from interface maspack.util.Scannable

isWritable, write

Methods inherited from interface artisynth.core.modelbase.HasNumericState

advanceState, getAuxVarDerivative, getAuxVarState, getStateVersion, numAuxVars, requiresAdvance, setAuxVarState

Field Detail

myProps

public static PropertyList myProps

Constructor Detail

ParticleLineConstraint

public ParticleLineConstraint()

ParticleLineConstraint

public ParticleLineConstraint(Line line)

ParticleLineConstraint

public ParticleLineConstraint(Vector3d dir,
                              Point3d origin)

ParticleLineConstraint

public ParticleLineConstraint(Particle p,
                              Line line)

ParticleLineConstraint

public ParticleLineConstraint(Particle p,
                              Vector3d dir,
                              Point3d center)

Method Detail

getAllPropertyInfo

public PropertyList getAllPropertyInfo()

Description copied from interface: HasProperties

Returns a list giving static information about all properties exported by this object.

Specified by:

getAllPropertyInfo in interface HasProperties

Overrides:

getAllPropertyInfo in class ParticleConstraintBase

Returns:

static information for all exported properties

getOrigin

public Point3d getOrigin()

getDirection

public Vector3d getDirection()

getLineSize

public double getLineSize()

setLineSize

public void setLineSize(double len)

updateConstraints

public double updateConstraints(double t,
                                int flags)

Description copied from interface: Constrainer

Updates the current set of constraints, and returns the maximum penetration > 0 associated with all of them. If no constraints are presently active, returns -1.

Specified by:

updateConstraints in interface Constrainer

Specified by:

updateConstraints in class ConstrainerBase

updateBounds

public void updateBounds(Vector3d pmin,
                         Vector3d pmax)

Description copied from interface: IsRenderable

Update the minimum and maximum points for this object. In an x-y-z coordinate system with x directed to the right and y directed upwards, the minimum and maximum points can be thought of as defining the left-lower-far and right-upper-near corners of a bounding cube. This method should only reduce the elements of the minimum point and increase the elements of the maximum point, since it may be used as part of an iteration to determine the bounding cube for several different objects.

Specified by:

updateBounds in interface IsRenderable

Overrides:

updateBounds in class RenderableConstrainerBase

Parameters:

pmin - minimum point

pmax - maximum point

createRenderProps

public RenderProps createRenderProps()

Description copied from interface: HasRenderProps

Factory method to create render properties appropriate to this object.

Specified by:

createRenderProps in interface HasRenderProps

Overrides:

createRenderProps in class RenderableConstrainerBase

Returns:

new render properties for this object

prerender

public void prerender(RenderList list)

Description copied from interface: IsRenderable

Called prior to rendering to allow this object to update the internal state required for rendering (such as by caching rendering coordinates). The object may add internal objects to the list of objects being rendered, by calling

list.addIfVisible (obj);

for each of the objects in question.

Specified by:

prerender in interface IsRenderable

Overrides:

prerender in class RenderableConstrainerBase

Parameters:

list - list of objects to be rendered

render

public void render(Renderer renderer,
                   int flags)

Description copied from interface: IsRenderable

Render this object using the functionality of the supplied Renderer.

Specified by:

render in interface IsRenderable

Specified by:

render in class RenderableConstrainerBase

Parameters:

renderer - provides the functionality used to perform the rendering.

flags - flags that may be used to control different aspects of the rendering. Flags are defined in Renderer and currently include Renderer.HIGHLIGHT and Renderer.SORT_FACES.

scaleMass

public void scaleMass(double s)

Description copied from interface: ScalableUnits

Scales all mass units.

Specified by:

scaleMass in interface ScalableUnits

Parameters:

s - scaling factor

scaleDistance

public void scaleDistance(double s)

Description copied from interface: ScalableUnits

Scales all distance coordinates.

Specified by:

scaleDistance in interface ScalableUnits

Parameters:

s - scaling factor

transformGeometry

public void transformGeometry(AffineTransform3dBase X)

Description copied from interface: TransformableGeometry

Applies an affine transformation to the geometry of this component. This method should be equivalent to

 TransformGeometryContext.transform (this, X, 0);
 

Specified by:

transformGeometry in interface TransformableGeometry

Parameters:

X - affine transformation to apply to the component

transformGeometry

public void transformGeometry(GeometryTransformer gtr,
                              TransformGeometryContext context,
                              int flags)

Description copied from interface: TransformableGeometry

Transforms the geometry of this component, using the geometry transformer gtr to transform its individual attributes. The context argument supplies information about what other components are currently being transformed, and also allows the requesting of update actions to be performed after all transform called have completed. The context is also the usual entity that calls this method, from within its TransformGeometryContext.apply(maspack.geometry.GeometryTransformer, int) method. The argument flags provides flags to specify various conditions associated with the the transformation. At present, the available flags are TransformableGeometry.TG_SIMULATING and TransformableGeometry.TG_ARTICULATED.

This method is not usually called directly by applications. Instead, it is typically called from within the TransformGeometryContext.apply(maspack.geometry.GeometryTransformer, int) method of the context, which takes care of the various operations needed for a complete transform operation, including calling TransformableGeometry.addTransformableDependencies(artisynth.core.modelbase.TransformGeometryContext, int) to collect other components that should be transformed, calling TransformableGeometry.transformGeometry(maspack.matrix.AffineTransform3dBase) for each component, notifying component parents that the geometry has changed, and calling any requested TransformGeometryActions. More details are given in the documentation for TransformGeometryContext.apply(maspack.geometry.GeometryTransformer, int).

TransformGeometryContext provides a number of static convenience transform methods which take care of building the context and calling apply() for a specified set of components.

This method should not generally call transformGeometry() for its descendant components. Instead, descendants needing transformation should be specified by adding them to the context in the method TransformableGeometry.addTransformableDependencies(artisynth.core.modelbase.TransformGeometryContext, int).

Specified by:

transformGeometry in interface TransformableGeometry

Parameters:

gtr - transformer implementing the transform

context - context information, including what other components are being transformed

flags - specifies conditions associated with the transformation

addTransformableDependencies

public void addTransformableDependencies(TransformGeometryContext context,
                                         int flags)

Description copied from interface: TransformableGeometry

Adds to context any transformable components which should be transformed as the same time as this component. This will generally include descendant components, and may also include other components to which this component is connected in some way.

This method is generally called from with the TransformGeometryContext.apply(maspack.geometry.GeometryTransformer, int) method of a TransformGeometryContext.

Specified by:

addTransformableDependencies in interface TransformableGeometry

Parameters:

context - context information, to which the dependent components are added.

flags - specifies conditions associated with the transformation